In the "Pajama Game", the script calls for one of the sewing machines to malfunction with a burst of sparks (an electrical explosion).
Most productions use one of the following sets of products, depending on which effect they wish to create, for simulating a malfunctioning sewing machine:
To Create Smoke:
Our UFK product line is specifically manufactured to be custom-built into props and set pieces. All products have mounting holes and flanges and come with complete instructions, making installation a breeze!
A small amount of powder is taken from the cartridge and placed into a piece of CS21 Slow Cotton, which has been formed into a "Birds Nest" and placed into the MG32 Mini Flash Pot. An IG03 Surefire Igniter is then inserted, used to ignited the Slow Cotton. Power for the IG03 is supplied by the MG35 Ignition System. When initiated, this will produce a steady stream of smoke, lasting for 3-10 seconds (depending on how much powder you use from the cartridge).
To Create an Electrical Explosion:
A small piece of DRY FP11 Flash Cotton (Flash Cotton is shipped wet for safety - be sure to read the directions and dry the product for 24 hours!) is loaded into the MG33 Wide Angle Flash Ejector. Another piece of DRY Flash Cotton (about the size of 1/2 a cotton ball) is fluffed up and treated with a small amount of Sparkle Additive (simply put the piece of cotton in a Ziploc bag, add some Sparkle Additive, and shake it up! This piece of treated flash cotton is then added to the Wide Angle Flash Ejector. When initiated with the Ignition System, an Electrical Explosion will result!
To Create an Electrical Explosion, followed by Smoke:
Follow the above steps for creating smoke, but simply add a small piece of Flash Cotton treated with Sparkle Additive to the top of the Slow Cotton/Smoke Powder "Birds Nest." The heat generated by the burning Slow Cotton will ignite the Flash Cotton - creating an electrical explosion, followed by smoke!
This setup will also work for other shows where an electrical device needs to malfunction (i.e. a television set, light fixture, control panel, etc).
Hopefully the above information gives you some ideas to play around with.
Theatre Effects Customer Service Department
Theatre Effects, 1810 Airport Exchange Blvd. #400, Erlanger, KY 41018
Phone: 1-800-791-7646 or 513-772-7646 Fax: 513-772-3579